Expert Drain Cleaning Services in Pomona, CA

When an ejector pump fails due to excessive grease and solids waste from the grease trap, it can lead to several problems such as clogged pipes, unpleasant odors, and even sewage backups. To address this issue, follow these steps: Turn off power: Before working on the ejector pump, make sure to turn off the power supply to avoid any accidents. Clear the blockage: Remove the cover from the grease trap and clean it thoroughly. Remove any accumulated grease and solids. Use a wet-dry vacuum to clean out the ejector pit and remove any remaining debris. If possible, use a snake or a power auger to clear any blockage in the pipes connected to the ejector pump. Inspect the pump: Check the ejector pump for any visible signs of damage or wear. If there is any damage, it might be necessary to replace the pump. If the pump appears to be in good condition, clean the impeller and volute, making sure there is no remaining grease or debris that could cause further issues. Test the pump: Turn the power back on and run water through the system to ensure that the pump is working properly. If the pump is still not functioning correctly, consult a professional plumber for further assistance. Regular maintenance: To prevent future issues with the ejector pump, establish a regular maintenance routine for your grease trap. This should include cleaning it at least once every three months, or more frequently depending on usage. Properly maintaining your grease trap can help prevent FOGS excess...