Professional Driveway Paving Contractors in San Marcos, TX

Typically all rejuvenators are of a basic design mix; the difference with RejuvaSeal is that we use the highest grades of raw stock materials to manufacture. Many manufacturers us the cheapest materials available to meet the specification, RejuvaSeal does not.

It is recommended to be re-applied every 3-4 years after the initial application or as needed, weather factors and seasonal temperatures will dictate this.

The recommendation is to crack seal after the application of RejuvaSeal. All the crack prep, vegetation removal, routing and cleaning of the cracks should be done prior to the application. The main reason is because the Rejuvaseal application creates a clear and fresh bonding surface for the crack seal.

Each batch manufactured is independently tested through a third party lab to insure that the material meets the EB-44B specifications set forth by the FAA. The actual test requirements are located on the RejuvaSeal Material Certification document located on this site.

The cure time of RejuvaSeal depends on a number of external factors, ambient surface temperature, air temperature, application rate, humidity, and so on. On an average, sunny, 85 degree day, with a light wind and a lower application rate, 4-6 hours. On an overcast, 65 degree day with no wind and a higher application rate 12-24 hours. Once the application is applied a minimum of 24 hours is recommended before placing traffic back on the surface.