Carlyle Environmental›
5.0 27 reviews
“From the initial contact to the end of cleaning, they were professional, compassionate, knowledgeable, and seemed truly invested in getting our belongings cleaned properly so we can try to safely move on with our lives.”
FAQs
What is the difference between abatement and remediation?
Abatement is an interruption of something or a reduction. Remediation is to correct an error or to find a remedy for. Mostly we do abatement with asbestos because we know where it is coming from and the solution is to get rid of it or put a stop to the fibers being released. Remediation is a slightly deeper process because not only do we need to remove the hazardous material, but we also need to find the source of the contamination. We then devise a plan which needs to include which method of removal is necessary and how we are going to prevent it from occurring in the future.
How can I be sure that I am buying a house free from prior methamphetamine contamination?
The seller is required by law to disclose this information to you. However, there are times when a seller does not have that knowledge and can not be held responsible. This is why before purchasing a home, we recommend testing for all interior contaminants.
How do I know where the moisture is coming from?
The most common sources of moisture causing mold growth are: Leaks from appliances; toilet and sink overflows; wet basements; HVAC issues; and leaking foundations.
How much does it cost to treat a home for asbestos?
First, a test is necessary to determine if asbestos is present in the home and if there is a hazard potential. These tests, done by a professional air quality consultant, can cost as much as $2000 depending on the size of the project. But this is extreme. For a typical project, you can expect to pay an average of $500. From there, if removal of a ceiling containing asbestos is necessary, expect to pay on average about $4./sq ft.
If mold is found growing inside my walls, can it be cleaned without knocking down my house?
When mold growth is found inside the walls, the safest method of remediation is unfortunately some demolition. It sounds worse than it is. We can mask off the affected area and conduct a partial demolition, only removing and reconstructing the contaminated portion.
More detailed information is available on the FAQ page of our website.
i
