Expert Solar Panel Installers in Honolulu, HI

For your personal safety and confidence, we always recommend getting an electric safety check when buying or renting new residential, commercial, or industrial property. A safety inspection should be carried out if the property was previously occupied, has not been maintained in the last 5 years, is more than 25 years old, or if the electrical installations are looking and acting faulty.

We are a licensed electrical contracting company with a growing team of professional electricians. You will get a consultation from one of our master electricians and his team of specialists will perform the on-site job for you under his close supervision.

We are experts in repairs and maintenance, but even better at installations and replacements. Our motto is to achieve 100% guaranteed satisfaction from all our clients therefore we immediately take care of any malfunctions that occur during the project. Any problems that happen after the job can also be repaired without additional costs on a case-to-case basis. Most clients hire us for the maintenance of their properties for years.

If your appliance is on when you plug it in, you may see a small arc as the prong of the plug makes contact with the internal contacts of the outlet. It is best to make sure that your appliance/device is completely turned off prior to plugging it in It is normal to see the occasional small flash of electricity when you plug in a lamp, hair dryer, vacuum, or other appliance. However, if there is a spark every time you use the outlet or a continued arcing sound while things are plugged in, there might be a problem. The outlet could be corroded and not making good contact, short circuited internally by a foreign object, or it has just worn out and the contacts inside no longer have any spring to them which allows them to keep a steady contact with what is plugged in. Short circuits, and overheating, can break down insulation and wires, and then there may be a potential fire hazard. An E I Electrical Inc. Service Expert can help diagnose the problem and recommend various options and solutions for you.

Over time and with frequent use, the outlet box can loosen. Pulling hard on cords to unplug them can add to this. Sometimes the box was not installed correctly and may just be loosely attached behind the wall and can start to pull forward as well. Sometime the screws holding the outlet to the box loose their threading and then the outlet pulls away from the box. It's best to tackle this problem when it first starts to occur as there are simply ways that we can fix and/or resecure the box and/or fix the threading on the screw holes or replace the screws. Once the outlet box pulls completely thru the wall, then you are looking at doing drywall patching or other repairs and it could damage the wiring within the wall creating a much bigger job.