Best Appliance Repair Services Near You

2,986 companies on file · 237 cities · 2,527 rated 4.5+ · 280 open 24/7 · 431 show a license

Data verified November 17, 2026

Top-rated in your area

We show companies for your area once your location is detected. Meanwhile, open an example such as Appliance Repair Services in Brooklyn, NY, or browse by state.

HomeAppliance Repairers

Overview: Appliance Repair Services

An appliance repair company comes to the house for the machines that are plumbed or wired in: washers, dryers, refrigerators, ovens and ranges, dishwashers, and sometimes the built-in microwave. The faults repeat. A washer that will not drain is usually a clogged pump or something stuck in it. A dryer that tumbles cold has lost its heating element. A fridge that runs without cooling has a compressor or sealed system problem. An oven that clicks and never lights wants an igniter.

Expect to pay for the visit. There is a fee for the diagnostic call, and the thing to ask on the phone is whether it comes off the bill if you approve the work. Have the model and serial number ready from the plate inside the door or behind the kickplate, because that detail decides whether the part rides out on the truck or takes a week.

Parts are where repairs die. A control board on a machine only a few seasons old can be back-ordered or discontinued. Sealed refrigeration work needs a technician certified to handle refrigerant, and anything on a gas range or gas dryer needs a person qualified on gas. While the manufacturer warranty is live, use the authorized servicer.

Use the state and city lists below to find companies that cover your address.

Cost of Appliance Repair

Start with the diagnostic fee, then compare the total for the diagnosed repair. The same symptom can have several causes; a repair range is not a diagnosis.

Service or scopePlanning rangeWhat this covers
Diagnostic visit$50–$100per appliance visitOne accessible residential appliance inspected during regular hours.Ask whether this fee is credited toward the repair and whether a second visit or second appliance costs extra.
Included scope and possible extras

Scope used for this estimate: Diagnosis; Written repair estimate

Outside this estimate: Repair labor; Replacement parts

Washer will not drain: pump replacement$150–$400per washerReplace one drain pump on an accessible freestanding washer.This is one diagnosed cause of a draining problem; controls, bearings or a blocked hose need a different quote.
Included scope and possible extras

Scope used for this estimate: Pump; Replacement labor; Operation check

Outside this estimate: Diagnostic visit if not credited; Stacked-unit removal

Electric dryer will not heat: element repair$150–$450per electric dryerReplace the heating element on an accessible electric dryer.Blocked vents, gas ignition faults and control failures are separate diagnoses.
Included scope and possible extras

Scope used for this estimate: Heating element; Labor and function check

Outside this estimate: Vent cleaning; Diagnostic visit if not credited

Refrigerator cooling repair: fan or defrost fault$200–$500per diagnosed repairReplace a failed fan motor, thermistor or defrost component in an accessible mainstream refrigerator; sealed-system work is separate.A warm refrigerator does not establish which part failed; require the diagnosis and complete repair total.
Included scope and possible extras

Scope used for this estimate: The specified replacement component; Repair labor and functional test

Outside this estimate: Compressor or sealed-system repairs; Built-in and luxury model premiums; Multiple unrelated faults

What changes the price

  • Appliance model, brand and part availability
  • Built-in or stacked installation and access
  • Regular-hours visit versus urgent or repeat attendance

Ask before you book

  • What failed, and what is the full price for that diagnosed repair?A symptom alone cannot distinguish a small component fault from a major assembly failure.
  • Is the diagnostic payment credited, and are the return visit and parts included?Compare the total you will pay, not a remaining balance after a fee already paid.
  • What warranty covers the repair, and what would replacement of the appliance cost installed?Age, repeated failures and the specific warranty help judge whether the repair is worthwhile.

Check the scope

A diagnostic fee buys diagnosis, not a completed repair. Compare the proposed repair with a replacement of similar capacity and features.

Compare quotes wisely

Send the model number and fault details before booking, and ask for one authorized total before parts are ordered.

How to read these estimates

These ranges combine published U.S. prices and cost guidance for the stated work. They are budgeting estimates, not offers from listed companies or a statistical national average. Confirm the total, included work and additional charges in writing.

U.S. planning estimates. Local quotes vary by location and the scope of work.

Frequently asked questions

When is a machine not worth repairing?

Weigh the repair against what a replacement costs and how much life the machine has left. A worn drum bearing means splitting a washer open, which is hours of labor on a machine already years old. Sealed system work on an aging fridge is the same story. Against that, a heating element, a pump, a thermostat or an igniter is usually a cheap fix on almost any machine and worth doing.

How does the call-out charge usually work?

You pay a set fee for the technician to come out and diagnose the fault. Whether it counts toward the repair varies by company, so ask on the phone and get the answer before the visit. Parts and labor should be quoted after the diagnosis, not guessed at beforehand. A company that quotes a firm price over the phone without seeing the machine is guessing at the fault.

Manufacturer service or an independent engineer?

While the machine is inside its manufacturer warranty, go through the authorized servicer or you risk the coverage. After that an independent is usually quicker and more flexible on parts, and a long-running local firm has seen your fault a hundred times. Ask an independent which brands they hold parts accounts for, because that is what decides how fast the job finishes.

Why do parts take so long to arrive?

Appliance parts are model-specific, and newer machines lean on electronic control boards that are made in batches. When a board is on back-order or discontinued, there is no substitute to fit. Common wear parts such as pumps, elements, belts and valves are usually on the truck or next-day. Ask at the diagnosis which of those two you are waiting on.

What information should I give when booking?

The make, the model number and the serial from the rating plate, the rough age of the machine, any error code on the display, and a plain description of what it does and when. Say whether it is gas or electric and whether it is built in. Mention if the machine has been worked on before. That call takes a minute and saves a wasted visit.

Browse by state

Top cities

Why these companies made our list

Is this page useful? Yes
No
Is there anything wrong with this page?
Back To Top