Professional Driveway Paving Contractors in Fort Wayne, IN

Sealcoating your driveway will extend the life of the pavement structure. Sealcoating acts as a waterproofing agent, minimizing the rate at which water enters the asphalt. The intrusion of moisture into asphalt accelerates its deterioration and is strongly related to asphalt failure. Sealcoating asphalt prevents the seepage of water and moisture from rain and snow, thus preventing damage from freeze thaw cycles which is a common reason your driveway begins forming cracks or even worse, pot holes. Sealcoating leaves a smooth, clean surface and gives your entrance a fresh and new look. Sealcoating fills surface voids, and help hide small cracks, patches and rough spots and sealcoating costs pennies per square foot compared to the dollars needed to repair or replace aging asphalt pavement structures.

We use the best commercial grade sealer on the markets, which exceeds specifications and contains proper amount of silica sand per gallon to ensure a very durable longer lasting application. A select mix of additives are blended to improve durability.

Please make sure your sprinkler system is turned off 24 hours prior to sealcoating and a minimum 0f 48 hours after sealcoating. This can potentially wash away the sealer.

Do not let any lawn fertilizers get on your driveway surface after sealcoating! If it does happen, try and rinse immediately! Lawn fertilizers can stain and discolor, causing the sealer to lose its luster and stain.

Anything that scrapes your driveway can damage it. Many scrapes and scratches look worse than they really are. Some snow removal companies use a rubber or polyurethane cutting edge on their plow blades to lessen the impact on your driveway, while others set the plow blade 1/2" above the surface to avoid damage. If possible, we recommend either option. Flat surfaces usually don't see any damage, it's uneven surfaces with high areas or sudden grade changes that are most susceptible to winter plow damage.