Professional Concrete Repair, Replacement & Resurfacing Contractors in Brookfield, WI

Polyaspartic floors can resume foot traffic in 1-4 hours and drive traffic in 24-48 hours. Cement floors can be walked upon after 24 hours and driven on after 48 hours. Cold and humidity can lengthen these times.

There are 20+-year-old coatings still going in Canada and Alaska. These coatings mechanically and chemically become one with your concrete and naturally heave or contract with your concrete. Cold and heat do not affect the surface. These surfaces can be salted without damage to your decorative concrete. You cannot plow these surfaces. We recommend using plastic shovels and snow blowers fitted with hard composite angle brackets and scraper blades.

The truth regarding these problems is that we use some of the most robust repair products available. They can be applied and ready for grinding in 5-15 minutes. They are stronger than epoxies and your concrete. We guarantee that pitting and pop-outs won't return. Cracks can return no matter what you hear, who says it, or what product is used. Because our products are so strong, if your concrete goes through the same process that initially caused the crack, your concrete may crack next to our repair with no failure. It has been our experience, over millions of square feet of resurfacing, that cracks on a good foundation (garages, basements, porches) tend not to return. Still, cracks on an unstable foundation, such as driveways, tend to return and usually quickly. Stable cracks tend not to return, but there is no guarantee that a crack will not return.

Under regular wear, tear, and cleaning, you can expect years of aesthetic and functional enjoyment from your residential concrete coating. When polyaspartic is used for both the base and topcoat, you can expect the coating to last 20 or more years. Where polyurea is used as a base coat, your coating should be expected to last 15+ years. As for an epoxy metallic pour, you can expect it to last 15+ years. With each of these cases, the clear topcoat can be roughed up and topcoated again to extend the coating life and restore its original luster.

All materials are purchased from Wisconsin-based companies, and we maintain strong, personal relationships with them. We've done our homework, comparing in-state and out-of-state suppliers. We found we can provide you with the best representation when it comes to our installers, not only using superior materials but also receiving excellent training directly from those we buy from.