Professional Concrete Repair, Replacement & Resurfacing Contractors in Oshkosh, WI

Hiring and retaining top-quality talent has become a challenge for most companies. Here at CCS, we have found that you get what you pay for in this industry. We pay our highly qualified team toward the top of the pay scale, as they bring the level of experience you want for your coating installation and client experience. We know this can affect our overall quoted price, but when we take care of our team, they take care of you. Our installation team has been doing this for years and takes the time to make sure the coating is being mixed and applied according to manufacturer instructions. Simply put, they know their craft and don't cut corners. Further, we believe you deserve the highest priority and care regarding communication and responsiveness. While CCS is not the cheapest option, we are the BEST!

The application process's very nature and the added materials' texture allow us to make your decorative concrete surface as slip-resistant as you desire.

Not all coatings are created equal. Epoxies are cheaper than polyaspartic, and some companies will use epoxy for the undercoatings. Some companies only apply two coats of the product; We use a four-coat system for our polyaspartic flooring, including two clear top coats for added protection and durability. Our coatings are all UV stable and will not yellow or fade over time like epoxies. The quality of polyaspartic is in the additives and solids. Some companies use solids as low as 60%. We use high solids from 72-90%, depending on what is needed for each surface. We offer a trustworthy, professional service and stand behind our products and quality.

Polyaspartic coatings were introduced in the early 1990s by Bayer Material Science, a leading chemical company. It was initially used as a protective, non-corrosion coating for steel. Today, polyaspartic is a go-to concrete coating choice for garages and commercial buildings, proving to be 6X stronger than epoxy. We use top-of-the-line materials for concrete coatings to ensure the best quality for your concrete surface. Our "100% solids" poly aspartic material provides maximum strength, as it is the highest quality. Where some of our competition uses 85% (or sometimes less) solids, we don't skimp on quality. This means more material remains on your floor than is typical with other companies. We also use two coats of polyaspartic (base and topcoat) for vinyl chip and tint coating projects and three coats when installing quartz. Polyaspartic is UV stable, meaning it does not react to sunlight. This ensures you won't ever see a discoloration in the coating along the apron of the garage. Further, polyaspartic is the most robust material with the maximum adhesion available on the market. This is where our 100% solids becomes even more essential, as it ensures you have the most material left behind on the coating... with the strongest material you can have applied.